You are here: Home / Products / Signal Isolator / Active Signal Isolators / ISOEM-S Analog Signal Isolator with Sensor Power Supply

ISOEM-S Analog Signal Isolator with Sensor Power Supply


Availability:

Quantity:



Request a Sample Add to Basket

A magneto-electrically isolated hybrid integrated circuit. The IC integrates a multi-isolated DC/DC converter power supply and a set of magneto-electrically coupled analog signal isolation amplifiers on the same chip. It adopts a low-cost solution of magneto-electrical coupling, and is mainly used in occasions where there is no special requirement for EMC (electromagnetic interference). The wide creepage distances on the input and output sides and the internal isolation measures enable the chip to reach an insulation voltage of 3KVDC. ISO EM-S series products are very easy to use, free of zero and gain adjustment, without the need for external zero and gain adjustment potentiometers, you can realize the isolation and conversion of industrial field signals. The isolated power supply configured at the input can be used to distribute power to passive two-wire and three-wire sensors such as displacement, resistance, etc. It can also be used as input preamplification, amplification of bridge circuits, and reference.

Input (Data Acquisition):
All
Output (Data Acquisition):
All
Communication Port (Data Acquisition):
All
Amount of Channel (Data Acquisition):
All
Input (VDC):
All
Output (VDC):
All
Output Power (W):
All
Package (DC-DC Converter):
All
Amount of Channel (DC-DC Converter):
All
Series Name:
All
Communication Port (Digital Meter):
No
Isolation Voltage(VDC):
All
Input (Isolation Amplifier):
All
Output (Isolation Amplifier):
All
Isolation Mode:
All
Isolation Volt. (VDC):
All
Package (Isolation Amplifier):
All
Power Supply:
All
Amount of Channel (Isolation Amplifier):
All

Analog Signal Isolator Sensor Power Supply Magnetic Isolation Amplifier 4-20mA Signal Transmitter

Product Description

SunYuan SIP12 Pin Package ISO EM-S Series, Analog Active Signal Isolation Transmitter Distributor is a magnetically isolated hybrid integrated circuit. The IC integrates a multi-isolated DC/DC converter power supply and a set of magneto-electrically coupled analog signal isolation amplifiers on the same chip. It adopts a low-cost solution of magneto-electrical coupling, and is mainly used in applications with no special requirements for EMC (electromagnetic interference). Wide creepage distances on the input and output sides and internal isolation measures enable the chip to achieve 3KVDC insulation voltage.

ISO EM-S series products are very easy to use, free of zero and gain adjustment, without external zero and gain adjustment potentiometer, can realize the isolation of industrial field signal conversion function. The isolated power supply configured at the input can be used to distribute power to passive two-wire and three-wire sensors such as displacement, resistance, etc. It can also be used as preamplifier at the input, amplifier and reference for bridge circuits.

ISO EM-S series Accuracy level: 0.1 grade, 0.2 grade. 0-5V/0-10V/0-75mV/0-2.5V/0-1mA/0-10mA/0-20mA/4-20mA and other international standard signals are inputted, and the output voltage signals can be output: 0-2.5V/0-5V/0-10V/1-5V; or the output current signals can be output: 0-10mA/0-20mA/4-20mA; the output signals have high loading capacity. 10mA/0-20mA/4-20mA; the output signal has high load capacity.