You are here: Home / Products / Signal Isolator / Non-Isolated Signal Conditioners / SY AC-P-O AC to DC Analog Signal Converter

SY AC-P-O AC to DC Analog Signal Converter


Availability:

Quantity:



Request a Sample Add to Basket

SY series of AC to DC (AC DC) signal low-cost two isolated transmitter, is a kind of AC signal acquisition into a linear counterpart of the DC signal hybrid integrated circuit. The circuit integrates a set of multiple highly isolated DC DC power supplies and a set of AC DC signal conversion circuits on the same chip. It can proportionally convert the 0-1Vrms (50-60HZ) industrial frequency signal collected by the sensor (AC transformer) into a 4-20mA 0-10mA 0-20mA DC current signal or a 0-1V 0-2 5V 0-5V 0-10V DC voltage signal.IC packaged products can be composed of single-phase or multi-phase fully-isolated transmitters by matching external AC transformers to realize the signals The IC package products can be matched with external AC transformers to form a single-phase or multi-phase fully isolated transmitter, realizing 3KV triple isolation between the input and output signals and auxiliary power supply.

Input (Data Acquisition):
All
Output (Data Acquisition):
All
Communication Port (Data Acquisition):
All
Amount of Channel (Data Acquisition):
All
Input (VDC):
All
Output (VDC):
All
Output Power (W):
All
Package (DC-DC Converter):
All
Amount of Channel (DC-DC Converter):
All
Series Name:
All
Communication Port (Digital Meter):
No
Isolation Voltage(VDC):
All
Input (Isolation Amplifier):
0-10V
Output (Isolation Amplifier):
All
Isolation Mode:
All
Isolation Volt. (VDC):
All
Package (Isolation Amplifier):
SIP
Power Supply:
All
Amount of Channel (Isolation Amplifier):
All

AC to DC Signal Converter 0-1Vrms to 4-20mA Converter 0-1Vrms to 0-10V Converter 50/60Hz Signal Conditioner

Product Description

SUNYUAN SY Series AC-DC signal transmitter IC is a kind of hybrid integrated circuits that convert theACsignal correspondingly into the linear DC signal. This circuit integrates a group of multi-channel high-isolationDC / DC power supplies and a group of AC / DC signal converter circuit on one chip. It can convert 0-1Vrms(50 ~ 60HZ) AC signal (collected from ac transformer) into 4-20mA/0-10mA / 0-20mA DCcurrent signal or0-1V/0-2.5V/0-5V/0- 10V DC voltage signal in proportional. It can be used with external ac transformerstocompose the single-phase or multiphase isolation transmitter with 3kvisolation between the input andoutputsignal isolation. That AC-DC signal transmitter IC is widely applied in the electrical, instrumentation, medicalequipment, industrial automation, etc.

CATEGORY

SY AC-P-O AC to DC Analog Signal Converter

Related Products