Ethernet IoT Analog Signal AD Acquisition Smart Sensor Module: SY AD02 / SY AD08-RJ45 Series

  The SunYuan SY AD 08-RJ45 series products enable analog acquisition between sensors and host computers for detecting analog signals or controlling remote devices. Through software configuration, it can be used for a variety of sensor types, including: analog signal input, analog signal output, and digital signal input/output (I/O). SY AD 08-RJ45 series products can be applied in RS-232/485 bus and RJ45 interface Ethernet industrial automation control system, 4-20mA/0-10V analog measurement, monitoring and control, 0-1mA/0-30mV/small signal measurement and industrial field signal isolation. 1mA/0-30mV/small signal measurement as well as industrial field signal isolation and long line transmission.

       The products include power isolation, input and output signal isolation, linearization, A/D conversion and RS-485 serial or Ethernet communication. Each serial port can be connected to a maximum of 256 SY AD 08-RJ45 series modules, the communication method uses the serial ASCII character communication protocol or MODBUS RTU communication protocol and Ethernet MODBUS TCP, its instruction set is compatible with the ADAM module, the configuration parameters can be set by the user, and it can be hooked up to the same bus with the control modules of other manufacturers, which is convenient for computer programming.

       
      SY AD 08-RJ45 series products are intelligent monitoring and control systems based on microcontrollers. All user-set configuration information such as IP address, port number, calibration value, ID address, baud rate, data format, checksum, and status are stored in non-volatile memory EEPROM.

       SY AD 08-RJ45 series products are designed and manufactured according to industrial standards, signal input/output isolation, can withstand 3000VDC isolation voltage, strong anti-interference ability, high reliability. Operating temperature range - 45℃～+85℃.