The SY AD08T series products enable signal acquisition between sensors and host computers for detecting analog signals or controlling remote devices. Through the software configuration, it can be used for a variety of sensor types, including: analog signal input, analog signal output, and digital signal input/output, SYAD08T series products can be used in RS-232/485 bus industrial automation control system, thermocouple signal measurement, monitoring and control, small signal measurement, and industrial field signal isolation and long-wire transmission and so on.

    SYAD08T series modules, the communication method adopts ASCII character communication protocol or MODBUS RTU communication protocol, its instruction set is compatible with ADAM module, the baud rate can be set by the user, and can be hooked up with other manufacturers' control modules on the same RS-485 bus, which is convenient for computer programming. The products include power isolation, input/output signal isolation, linearization, A/D conversion and RS-485 serial communication. Each serial port can be connected to a maximum of 256.

    SYAD08T series products are designed and manufactured according to industrial standards, with isolation between signal input/output, can withstand 3000VDC isolation voltage, strong anti-interference ability and high reliability. Operating temperature range - 45℃～+85℃.

    SYAD08T series products are intelligent monitoring and control system based on microcontroller, all the user-set calibration values, address, baud rate, data format, calibration and status and other configuration information are stored in non-volatile memory EEPROM.

    SYAD08T series products can measure a variety of sensor signals, including RTDs, thermocouples, strain gauges, etc. For specific selection, please refer to the type codes supported by different models.